spsp

httpd.conf (21363B) - raw

---

 #
 # This is the main Apache HTTP server configuration file.  It contains the
 # configuration directives that give the server its instructions.
 # See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
 # In particular, see 
 # <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
 # for a discussion of each configuration directive.
 #
 # Do NOT simply read the instructions in here without understanding
 # what they do.  They're here only as hints or reminders.  If you are unsure
 # consult the online docs. You have been warned.  
 #
 # Configuration and logfile names: If the filenames you specify for many
 # of the server's control files begin with "/" (or "drive:/" for Win32), the
 # server will use that explicit path.  If the filenames do *not* begin
 # with "/", the value of ServerRoot is prepended -- so "logs/access_log"
 # with ServerRoot set to "/usr/local/apache2" will be interpreted by the
 # server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" 
 # will be interpreted as '/logs/access_log'.
 
 #
 # ServerRoot: The top of the directory tree under which the server's
 # configuration, error, and log files are kept.
 #
 # Do not add a slash at the end of the directory path.  If you point
 # ServerRoot at a non-local disk, be sure to specify a local disk on the
 # Mutex directive, if file-based mutexes are used.  If you wish to share the
 # same ServerRoot for multiple httpd daemons, you will need to change at
 # least PidFile.
 #
 ServerRoot "/usr/local"
 
 #
 # Mutex: Allows you to set the mutex mechanism and mutex file directory
 # for individual mutexes, or change the global defaults
 #
 # Uncomment and change the directory if mutexes are file-based and the default
 # mutex file directory is not on a local disk or is not appropriate for some
 # other reason.
 #
 # Mutex default:/var/run
 
 #
 # Listen: Allows you to bind Apache to specific IP addresses and/or
 # ports, instead of the default. See also the <VirtualHost>
 # directive.
 #
 # Change this to Listen on specific IP addresses as shown below to 
 # prevent Apache from glomming onto all bound IP addresses.
 #
 #Listen 12.34.56.78:80
 Listen 80
 
 #
 # Dynamic Shared Object (DSO) Support
 #
 # To be able to use the functionality of a module which was built as a DSO you
 # have to place corresponding `LoadModule' lines at this location so the
 # directives contained in it are actually available _before_ they are used.
 # Statically compiled modules (those listed by `httpd -l') do not need
 # to be loaded here.
 #
 # Example:
 # LoadModule foo_module modules/mod_foo.so
 #
 #LoadModule mpm_event_module libexec/apache24/mod_mpm_event.so
 LoadModule mpm_prefork_module libexec/apache24/mod_mpm_prefork.so
 #LoadModule mpm_worker_module libexec/apache24/mod_mpm_worker.so
 LoadModule authn_file_module libexec/apache24/mod_authn_file.so
 #LoadModule authn_dbm_module libexec/apache24/mod_authn_dbm.so
 #LoadModule authn_anon_module libexec/apache24/mod_authn_anon.so
 #LoadModule authn_dbd_module libexec/apache24/mod_authn_dbd.so
 #LoadModule authn_socache_module libexec/apache24/mod_authn_socache.so
 LoadModule authn_core_module libexec/apache24/mod_authn_core.so
 LoadModule authz_host_module libexec/apache24/mod_authz_host.so
 LoadModule authz_groupfile_module libexec/apache24/mod_authz_groupfile.so
 LoadModule authz_user_module libexec/apache24/mod_authz_user.so
 #LoadModule authz_dbm_module libexec/apache24/mod_authz_dbm.so
 #LoadModule authz_owner_module libexec/apache24/mod_authz_owner.so
 #LoadModule authz_dbd_module libexec/apache24/mod_authz_dbd.so
 LoadModule authz_core_module libexec/apache24/mod_authz_core.so
 #LoadModule authnz_fcgi_module libexec/apache24/mod_authnz_fcgi.so
 LoadModule access_compat_module libexec/apache24/mod_access_compat.so
 LoadModule auth_basic_module libexec/apache24/mod_auth_basic.so
 #LoadModule auth_form_module libexec/apache24/mod_auth_form.so
 #LoadModule auth_digest_module libexec/apache24/mod_auth_digest.so
 #LoadModule allowmethods_module libexec/apache24/mod_allowmethods.so
 #LoadModule file_cache_module libexec/apache24/mod_file_cache.so
 #LoadModule cache_module libexec/apache24/mod_cache.so
 #LoadModule cache_disk_module libexec/apache24/mod_cache_disk.so
 #LoadModule cache_socache_module libexec/apache24/mod_cache_socache.so
 #LoadModule socache_shmcb_module libexec/apache24/mod_socache_shmcb.so
 #LoadModule socache_dbm_module libexec/apache24/mod_socache_dbm.so
 #LoadModule socache_memcache_module libexec/apache24/mod_socache_memcache.so
 #LoadModule watchdog_module libexec/apache24/mod_watchdog.so
 #LoadModule macro_module libexec/apache24/mod_macro.so
 #LoadModule dbd_module libexec/apache24/mod_dbd.so
 #LoadModule dumpio_module libexec/apache24/mod_dumpio.so
 #LoadModule buffer_module libexec/apache24/mod_buffer.so
 #LoadModule data_module libexec/apache24/mod_data.so
 #LoadModule ratelimit_module libexec/apache24/mod_ratelimit.so
 LoadModule reqtimeout_module libexec/apache24/mod_reqtimeout.so
 #LoadModule ext_filter_module libexec/apache24/mod_ext_filter.so
 #LoadModule request_module libexec/apache24/mod_request.so
 #LoadModule include_module libexec/apache24/mod_include.so
 LoadModule filter_module libexec/apache24/mod_filter.so
 #LoadModule reflector_module libexec/apache24/mod_reflector.so
 #LoadModule substitute_module libexec/apache24/mod_substitute.so
 #LoadModule sed_module libexec/apache24/mod_sed.so
 #LoadModule charset_lite_module libexec/apache24/mod_charset_lite.so
 #LoadModule deflate_module libexec/apache24/mod_deflate.so
 #LoadModule xml2enc_module libexec/apache24/mod_xml2enc.so
 #LoadModule proxy_html_module libexec/apache24/mod_proxy_html.so
 LoadModule mime_module libexec/apache24/mod_mime.so
 LoadModule log_config_module libexec/apache24/mod_log_config.so
 #LoadModule log_debug_module libexec/apache24/mod_log_debug.so
 #LoadModule log_forensic_module libexec/apache24/mod_log_forensic.so
 #LoadModule logio_module libexec/apache24/mod_logio.so
 LoadModule env_module libexec/apache24/mod_env.so
 #LoadModule mime_magic_module libexec/apache24/mod_mime_magic.so
 #LoadModule cern_meta_module libexec/apache24/mod_cern_meta.so
 #LoadModule expires_module libexec/apache24/mod_expires.so
 LoadModule headers_module libexec/apache24/mod_headers.so
 #LoadModule usertrack_module libexec/apache24/mod_usertrack.so
 #LoadModule unique_id_module libexec/apache24/mod_unique_id.so
 LoadModule setenvif_module libexec/apache24/mod_setenvif.so
 LoadModule version_module libexec/apache24/mod_version.so
 #LoadModule remoteip_module libexec/apache24/mod_remoteip.so
 #LoadModule proxy_module libexec/apache24/mod_proxy.so
 #LoadModule proxy_connect_module libexec/apache24/mod_proxy_connect.so
 #LoadModule proxy_ftp_module libexec/apache24/mod_proxy_ftp.so
 #LoadModule proxy_http_module libexec/apache24/mod_proxy_http.so
 #LoadModule proxy_fcgi_module libexec/apache24/mod_proxy_fcgi.so
 #LoadModule proxy_scgi_module libexec/apache24/mod_proxy_scgi.so
 #LoadModule proxy_uwsgi_module libexec/apache24/mod_proxy_uwsgi.so
 #LoadModule proxy_fdpass_module libexec/apache24/mod_proxy_fdpass.so
 #LoadModule proxy_wstunnel_module libexec/apache24/mod_proxy_wstunnel.so
 #LoadModule proxy_ajp_module libexec/apache24/mod_proxy_ajp.so
 #LoadModule proxy_balancer_module libexec/apache24/mod_proxy_balancer.so
 #LoadModule proxy_express_module libexec/apache24/mod_proxy_express.so
 #LoadModule proxy_hcheck_module libexec/apache24/mod_proxy_hcheck.so
 #LoadModule session_module libexec/apache24/mod_session.so
 #LoadModule session_cookie_module libexec/apache24/mod_session_cookie.so
 #LoadModule session_crypto_module libexec/apache24/mod_session_crypto.so
 #LoadModule session_dbd_module libexec/apache24/mod_session_dbd.so
 #LoadModule slotmem_shm_module libexec/apache24/mod_slotmem_shm.so
 #LoadModule slotmem_plain_module libexec/apache24/mod_slotmem_plain.so
 #LoadModule ssl_module libexec/apache24/mod_ssl.so
 #LoadModule dialup_module libexec/apache24/mod_dialup.so
 #LoadModule http2_module libexec/apache24/mod_http2.so
 #LoadModule proxy_http2_module libexec/apache24/mod_proxy_http2.so
 #LoadModule md_module libexec/apache24/mod_md.so
 #LoadModule lbmethod_byrequests_module libexec/apache24/mod_lbmethod_byrequests.so
 #LoadModule lbmethod_bytraffic_module libexec/apache24/mod_lbmethod_bytraffic.so
 #LoadModule lbmethod_bybusyness_module libexec/apache24/mod_lbmethod_bybusyness.so
 #LoadModule lbmethod_heartbeat_module libexec/apache24/mod_lbmethod_heartbeat.so
 LoadModule unixd_module libexec/apache24/mod_unixd.so
 #LoadModule heartbeat_module libexec/apache24/mod_heartbeat.so
 #LoadModule heartmonitor_module libexec/apache24/mod_heartmonitor.so
 #LoadModule dav_module libexec/apache24/mod_dav.so
 LoadModule status_module libexec/apache24/mod_status.so
 LoadModule autoindex_module libexec/apache24/mod_autoindex.so
 #LoadModule asis_module libexec/apache24/mod_asis.so
 #LoadModule info_module libexec/apache24/mod_info.so
 <IfModule !mpm_prefork_module>
 	#LoadModule cgid_module libexec/apache24/mod_cgid.so
 </IfModule>
 <IfModule mpm_prefork_module>
 	LoadModule cgi_module libexec/apache24/mod_cgi.so
 </IfModule>
 #LoadModule dav_fs_module libexec/apache24/mod_dav_fs.so
 #LoadModule dav_lock_module libexec/apache24/mod_dav_lock.so
 #LoadModule vhost_alias_module libexec/apache24/mod_vhost_alias.so
 #LoadModule negotiation_module libexec/apache24/mod_negotiation.so
 LoadModule dir_module libexec/apache24/mod_dir.so
 #LoadModule imagemap_module libexec/apache24/mod_imagemap.so
 #LoadModule actions_module libexec/apache24/mod_actions.so
 #LoadModule speling_module libexec/apache24/mod_speling.so
 #LoadModule userdir_module libexec/apache24/mod_userdir.so
 LoadModule alias_module libexec/apache24/mod_alias.so
 LoadModule rewrite_module libexec/apache24/mod_rewrite.so
 
 # Third party modules
 IncludeOptional etc/apache24/modules.d/[0-9][0-9][0-9]_*.conf
  
 <IfModule unixd_module>
 #
 # If you wish httpd to run as a different user or group, you must run
 # httpd as root initially and it will switch.  
 #
 # User/Group: The name (or #number) of the user/group to run httpd as.
 # It is usually good practice to create a dedicated user and group for
 # running httpd, as with most system services.
 #
 User www
 Group www
 
 </IfModule>
 
 # 'Main' server configuration
 #
 # The directives in this section set up the values used by the 'main'
 # server, which responds to any requests that aren't handled by a
 # <VirtualHost> definition.  These values also provide defaults for
 # any <VirtualHost> containers you may define later in the file.
 #
 # All of these directives may appear inside <VirtualHost> containers,
 # in which case these default settings will be overridden for the
 # virtual host being defined.
 #
 
 #
 # ServerAdmin: Your address, where problems with the server should be
 # e-mailed.  This address appears on some server-generated pages, such
 # as error documents.  e.g. admin@your-domain.com
 #
 ServerAdmin you@example.com
 
 #
 # ServerName gives the name and port that the server uses to identify itself.
 # This can often be determined automatically, but we recommend you specify
 # it explicitly to prevent problems during startup.
 #
 # If your host doesn't have a registered DNS name, enter its IP address here.
 #
 #ServerName www.example.com:80
 
 #
 # Deny access to the entirety of your server's filesystem. You must
 # explicitly permit access to web content directories in other 
 # <Directory> blocks below.
 #
 <Directory />
     AllowOverride none
     Require all denied
 </Directory>
 
 #
 # Note that from this point forward you must specifically allow
 # particular features to be enabled - so if something's not working as
 # you might expect, make sure that you have specifically enabled it
 # below.
 #
 
 #
 # DocumentRoot: The directory out of which you will serve your
 # documents. By default, all requests are taken from this directory, but
 # symbolic links and aliases may be used to point to other locations.
 #
 DocumentRoot "/home/compiler/programs/spsp/html"
 #DocumentRoot "/usr/local/www/apache24/data"
 #DocumentRoot "/usr/local/www/spsp"
 #<Directory "/usr/local/www/apache24/data">
 <Directory "/home/compiler/programs/spsp/html">
 #<Directory "/usr/local/www/spsp">
     #
     # Possible values for the Options directive are "None", "All",
     # or any combination of:
     #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
     #
     # Note that "MultiViews" must be named *explicitly* --- "Options All"
     # doesn't give it to you.
     #
     # The Options directive is both complicated and important.  Please see
     # http://httpd.apache.org/docs/2.4/mod/core.html#options
     # for more information.
     #
     Options Indexes FollowSymLinks
 
     #
     # AllowOverride controls what directives may be placed in .htaccess files.
     # It can be "All", "None", or any combination of the keywords:
     #   AllowOverride FileInfo AuthConfig Limit
     #
     AllowOverride None
 
     #
     # Controls who can get stuff from this server.
     #
     Require all granted
 </Directory>
 
 #
 # DirectoryIndex: sets the file that Apache will serve if a directory
 # is requested.
 #
 <IfModule dir_module>
     DirectoryIndex index.html
 </IfModule>
 
 #
 # The following lines prevent .htaccess and .htpasswd files from being 
 # viewed by Web clients. 
 #
 <Files ".ht*">
     Require all denied
 </Files>
 
 #
 # ErrorLog: The location of the error log file.
 # If you do not specify an ErrorLog directive within a <VirtualHost>
 # container, error messages relating to that virtual host will be
 # logged here.  If you *do* define an error logfile for a <VirtualHost>
 # container, that host's errors will be logged there and not here.
 #
 ErrorLog "/var/log/httpd-error.log"
 
 #
 # LogLevel: Control the number of messages logged to the error_log.
 # Possible values include: debug, info, notice, warn, error, crit,
 # alert, emerg.
 #
 LogLevel warn
 
 <IfModule log_config_module>
     #
     # The following directives define some format nicknames for use with
     # a CustomLog directive (see below).
     #
     LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
     LogFormat "%h %l %u %t \"%r\" %>s %b" common
 
     <IfModule logio_module>
       # You need to enable mod_logio.c to use %I and %O
       LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
     </IfModule>
 
     #
     # The location and format of the access logfile (Common Logfile Format).
     # If you do not define any access logfiles within a <VirtualHost>
     # container, they will be logged here.  Contrariwise, if you *do*
     # define per-<VirtualHost> access logfiles, transactions will be
     # logged therein and *not* in this file.
     #
     CustomLog "/var/log/httpd-access.log" common
 
     #
     # If you prefer a logfile with access, agent, and referer information
     # (Combined Logfile Format) you can use the following directive.
     #
     #CustomLog "/var/log/httpd-access.log" combined
 </IfModule>
 
 <IfModule alias_module>
     #
     # Redirect: Allows you to tell clients about documents that used to 
     # exist in your server's namespace, but do not anymore. The client 
     # will make a new request for the document at its new location.
     # Example:
     # Redirect permanent /foo http://www.example.com/bar
 
     #
     # Alias: Maps web paths into filesystem paths and is used to
     # access content that does not live under the DocumentRoot.
     # Example:
     # Alias /webpath /full/filesystem/path
     #
     # If you include a trailing / on /webpath then the server will
     # require it to be present in the URL.  You will also likely
     # need to provide a <Directory> section to allow access to
     # the filesystem path.
 
     #
     # ScriptAlias: This controls which directories contain server scripts. 
     # ScriptAliases are essentially the same as Aliases, except that
     # documents in the target directory are treated as applications and
     # run by the server when requested rather than as documents sent to the
     # client.  The same rules about trailing "/" apply to ScriptAlias
     # directives as to Alias.
     #
     #ScriptAlias /cgi-bin/ "/usr/local/www/apache24/cgi-bin/"
     ScriptAlias /cgi/ "/home/compiler/programs/spsp/cgi/"
 
 </IfModule>
 
 <IfModule cgid_module>
     #
     # ScriptSock: On threaded servers, designate the path to the UNIX
     # socket used to communicate with the CGI daemon of mod_cgid.
     #
     #Scriptsock cgisock
 </IfModule>
 
 #
 # "/usr/local/www/apache24/cgi-bin" should be changed to whatever your ScriptAliased
 # CGI directory exists, if you have that configured.
 #
 #<Directory "/usr/local/www/apache24/cgi-bin">
 <Directory "/home/compiler/programs/spsp/cgi">
     AllowOverride None
     Options None
     Require all granted
 </Directory>
 
 <IfModule headers_module>
     #
     # Avoid passing HTTP_PROXY environment to CGI's on this or any proxied
     # backend servers which have lingering "httpoxy" defects.
     # 'Proxy' request header is undefined by the IETF, not listed by IANA
     #
     RequestHeader unset Proxy early
 </IfModule>
 
 <IfModule mime_module>
     #
     # TypesConfig points to the file containing the list of mappings from
     # filename extension to MIME-type.
     #
     TypesConfig etc/apache24/mime.types
 
     #
     # AddType allows you to add to or override the MIME configuration
     # file specified in TypesConfig for specific file types.
     #
     #AddType application/x-gzip .tgz
     #
     # AddEncoding allows you to have certain browsers uncompress
     # information on the fly. Note: Not all browsers support this.
     #
     #AddEncoding x-compress .Z
     #AddEncoding x-gzip .gz .tgz
     #
     # If the AddEncoding directives above are commented-out, then you
     # probably should define those extensions to indicate media types:
     #
     AddType application/x-compress .Z
     AddType application/x-gzip .gz .tgz
 
     #
     # AddHandler allows you to map certain file extensions to "handlers":
     # actions unrelated to filetype. These can be either built into the server
     # or added with the Action directive (see below)
     #
     # To use CGI scripts outside of ScriptAliased directories:
     # (You will also need to add "ExecCGI" to the "Options" directive.)
     #
     #AddHandler cgi-script .cgi
 
     # For type maps (negotiated resources):
     #AddHandler type-map var
 
     #
     # Filters allow you to process content before it is sent to the client.
     #
     # To parse .shtml files for server-side includes (SSI):
     # (You will also need to add "Includes" to the "Options" directive.)
     #
     #AddType text/html .shtml
     #AddOutputFilter INCLUDES .shtml
 </IfModule>
 
 #
 # The mod_mime_magic module allows the server to use various hints from the
 # contents of the file itself to determine its type.  The MIMEMagicFile
 # directive tells the module where the hint definitions are located.
 #
 #MIMEMagicFile etc/apache24/magic
 
 #
 # Customizable error responses come in three flavors:
 # 1) plain text 2) local redirects 3) external redirects
 #
 # Some examples:
 #ErrorDocument 500 "The server made a boo boo."
 #ErrorDocument 404 /missing.html
 #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
 #ErrorDocument 402 http://www.example.com/subscription_info.html
 #
 
 #
 # MaxRanges: Maximum number of Ranges in a request before
 # returning the entire resource, or one of the special
 # values 'default', 'none' or 'unlimited'.
 # Default setting is to accept 200 Ranges.
 #MaxRanges unlimited
 
 #
 # EnableMMAP and EnableSendfile: On systems that support it, 
 # memory-mapping or the sendfile syscall may be used to deliver
 # files.  This usually improves server performance, but must
 # be turned off when serving from networked-mounted 
 # filesystems or if support for these functions is otherwise
 # broken on your system.
 # Defaults: EnableMMAP On, EnableSendfile Off
 #
 #EnableMMAP off
 #EnableSendfile on
 
 # Supplemental configuration
 #
 # The configuration files in the etc/apache24/extra/ directory can be 
 # included to add extra features or to modify the default configuration of 
 # the server, or you may simply copy their contents here and change as 
 # necessary.
 
 # Server-pool management (MPM specific)
 #Include etc/apache24/extra/httpd-mpm.conf
 
 # Multi-language error messages
 #Include etc/apache24/extra/httpd-multilang-errordoc.conf
 
 # Fancy directory listings
 #Include etc/apache24/extra/httpd-autoindex.conf
 
 # Language settings
 #Include etc/apache24/extra/httpd-languages.conf
 
 # User home directories
 #Include etc/apache24/extra/httpd-userdir.conf
 
 # Real-time info on requests and configuration
 #Include etc/apache24/extra/httpd-info.conf
 
 # Virtual hosts
 Include etc/apache24/extra/httpd-vhosts.conf
 
 # Local access to the Apache HTTP Server Manual
 #Include etc/apache24/extra/httpd-manual.conf
 
 # Distributed authoring and versioning (WebDAV)
 #Include etc/apache24/extra/httpd-dav.conf
 
 # Various default settings
 #Include etc/apache24/extra/httpd-default.conf
 
 # Configure mod_proxy_html to understand HTML4/XHTML1
 <IfModule proxy_html_module>
 Include etc/apache24/extra/proxy-html.conf
 </IfModule>
 
 # Secure (SSL/TLS) connections
 #Include etc/apache24/extra/httpd-ssl.conf
 #
 # Note: The following must must be present to support
 #       starting without SSL on platforms with no /dev/random equivalent
 #       but a statically compiled-in mod_ssl.
 #
 <IfModule ssl_module>
 SSLRandomSeed startup builtin
 SSLRandomSeed connect builtin
 </IfModule>
 
 Include etc/apache24/Includes/*.conf